Giamoto Rearsets Ducati Panigale V4
The V4 Ducati Panigale is arguably the most stunning supersport motorcycle available to date. When tasked with designing and manufacturing after market parts for such a machine it would be inappropriate to simply offer something that would merely get the job done using items pulled from a generic parts bin and cobbled together. It would just look out of place.
Whether it is a tail tidy, exhaust system or in our case a rear set kit we feel it must have that same feeling of function AND form to work with the overall design ethos of the Ducati design engineers, a similar DNA if you like.
To this end here at Gia-Moto we have designed a rear set kit that doesn't simply get the job done but looks like it is meant to be fitted to the bike even if that entails a much higher level of difficulty to manufacture. The brake side control plate for example is hewn from its solid billet of 6082 aluminium by no less than seven individual milling machine set ups. You will find aerospace quality components throughout the kit including 6AL 4V titanium fasteners with toe pegs machined from 7000 series aluminium. All the major components are machined from 6082 aluminium and hard anodised.
Note: colours other than silver or black are usually soft anodised.
Our kit has a number of key features not normally found on after market kits such as, designed and manufactured in England. All stock mounting points are provided including brake light switch and exhaust cover steady mounts. Both brake and gear levers pivot on European or Japanese dual row ball races for ultimate control precision eliminating the slop and free play of stock levers. All parts are available separately which is useful should you wish to take a few spare toe and foot pegs along with you on track days.
The kit is simplicity itself to fit just swap out the stock parts and fit them to the new control assemblies. Brake light switch and ABS operation remain unaffected.
Unique to Gia-Moto The foot pegs can be adjusted to one of three positions by simply loosening two screws and removing the assembly from the bike and re- fitting in the desired position, the orientation of the foot peg can be adjusted via a single hidden screw at the rear of the peg carrier. A special holding tool is supplied with the kit for use with a vice allowing tightening or loosening without marking the peg along with a tube of Loctite thread locking compound to retain the fasteners.
A pair of 8mm offset peg carriers are also included in the set to give three additional positions to help fine tune your set up. A 10mm offset carrier will be available soon.
Carrier foot peg positions as follows:
Zero Offset carrier:
Position One -- Stock
Position Two – 22.25 mm Back 3.65 mm Up
Position Three – 8.00 mm Back 21.00 mm Up
8mm Offset Carrier:
Position One – 6.00 mm For 5.00 mm Down
Position Two – 29.75 mm Back 1.00 mm Up
Position Three – 6.65 mm Back 29.00 mm Up
Brake And gear toe pegs slide in their slots and are easily adjusted using a 4mm hexagon wrench from the front while the rear set is fitted to the bike. The gear lever has provision for race (reverse shift) gear selection.
The kit is available with a number of options, super grippy foot pegs can be specced in track friendly round with plastic end plugs or OEM look tapered both in short, long, or folding styles. Brake and gear toe pegs can be supplied in either fixed or folding types and with different colour combinations along with custom fastener choices.
PLEASE READ OUR RETURN POLICY CAREFULLY
Returns: We do not authorise nor accept returns on closeout/clearance items, special orders, or merchandise that has been installed, used, modified, painted or not in original new condition. Please be very careful when ordering clearance or special order items. Please check fit before installation. Payments for special orders are not refundable.
All authorized refunds and exchanges will be gladly accepted if you contact us at firstname.lastname@example.org within 7 days of receipt of your package. Once we authorize the merchandise to be returned, we will issue you a Return Authorization (RA) number to be written on the outside of the package.
Any product returning to Fender-Eliminators must be in its original, unused condition with its original packaging intact. All product contents must be returned in the original condition as well. All returns are subject to a 10% restocking fee. Any returns that are sent without a return authorisation number will cause delays in correcting any issues you may have. Please contact us first! Shipping and handling /insurance charges are not refundable. Customer must ensure return shipping is included with signature of delivery option. Please allow up to 72 hours for refunds to be processed.
Yamaha MT07 Quick Release Fuel Cap by Womet-Tech Womet-Tech quick action fuel caps are CNC machined from billet aluminium and supplied anodised black with laser etched... View full product details
2015-2020 Yamaha MT07 Frame Sliders by Womet-Tech These Womet-Tech frame sliders are suitable for the Yamaha MT07 model. Easy to install, they offer essential protection to the... View full product details
2016-2020 Yamaha XSR700 Frame Sliders by Womet-Tech These Womet-Tech frame sliders are suitable for the Yamaha XSR700 model. Easy to install, they offer essential protection to... View full product details
2016-2020 Yamaha XSR900 Frame Sliders by Womet-Tech These Womet-Tech frame sliders are suitable for the Yamaha XSR900 model. Easy to install, they offer essential protection to... View full product details